Rockwell Automation Allen-Bradley 1606-XLE120E - Page 13

Rockwell Automation Publication 1606-RM100A-EN-P - July 2020 13
Power Supply - 24V, 5 A, 120 W, Single-phase Input Reference Manual
1606-XLE120E, 1606-XLE120EC,
1606-XLE120ED
Input Output DC OK-Signal
Type Screw termination Screw termination Push-in termination
Solid wire
Max 6 mm
2
Max 6 mm
2
Max 1.5 mm
2
Stranded wire
Max 4 mm
2
Max 4 mm
2
Max 1.5 mm
2
American Wire Gauge AWG 20…10 AWG 20…10 AWG 24…16
Wire diameter max (including ferrules) 2.8 mm (0.11 in.) 2.8 mm (0.11 in.) 1.6 mm (0.06 in.)
Recommended tightening torque Max 1 N•m, 9 lb•in Max 1 N•m, 9 lb•in -
Wire stripping length 7 mm (0.28 in.) 7 mm (0.28 in.) 7 mm (0.28 in.)
Type Screw termination Screw termination Push-in termination
Screwdriver Slotted or Cross- head No 2 Slotted or Cross- head No 2 3.0 mm (0.12 in.) slotted to open the spring
1606-XLE120EL Input Output DC OK-Signal
Type
Quick-connect spring-clamp
termination
Quick-connect spring-clamp
termination
Push-in termination
Solid wire
Max 6 mm
2
Max 6 mm
2
Max 1.5 mm
2
Stranded wire
Max 4 mm
2
Max 4 mm
2
Max 1.5 mm
2
American Wire Gauge AWG 20…10 AWG 20…10 AWG 24…16
Wire diameter max (including ferrules) 2.8 mm (0.11in.) 2.8 mm (0.11 in.) 1.6 mm (0.06 in.)
Wire stripping length 10 mm (0.4 in.) 10 mm (0.4 in.) 7 mm (0.28 in.)
Screwdriver - - 3.0 mm (0.12 in.) slotted to open the spring
1606-XLE120EH Input Output DC OK-Signal
Type Push-in termination Push-in termination Push-in termination
Solid wire
Max 2.5 mm
2
Max 2.5 mm
2
Max 1.5 mm
2
Stranded wire
Max 2.5 mm
2
Max 2.5 mm
2
Max 1.5 mm
2
American Wire Gauge
Max 1.5 mm
2
Max 1.5 mm
2
Max 1.5 mm
2
Wire diameter max (including ferrules) AWG 24…12 AWG 24…12 AWG 24…16
Recommended tightening torque 2.3 mm (0.09 in.) 2.3 mm (0.09 in.) 1.6 mm (0.06 in.)
Wire stripping length 10 mm (0.4 in.) 10 mm (0.4 in.) 10 mm (0.4 in.)
Screwdriver 3.0 mm (0.12 in.) slotted to open spring 3.0 mm (0.12 in.) slotted to open spring 3.0 mm (0.12 in.) slotted to open the spring