Rockwell Automation Allen-Bradley ControlLogix 1756-MVI - Page 17

ControlLogix Multi-Vendor Interface Module 17
Publication 1756-IN001A-US-P - May 2000
You will see the BIOS Setup Main Menu:
2. Press the Tab key to move between menu choices. Press
Enter to select a choice.
3. Choose MVI Module Configuration to configure the module
type and console. The MVI Module Configuration Menu
will open.
4. Use the Tab key to move between menu items and the
+ and – keys to change an item.
| System Bios Setup - Utility v4.001 |
| (C) 1998 General Software, Inc. All rights reserved |
+---------------------------------------------------------+
| |
| |
| MVI Module Configuration |
| Begin Flash ROM Update Mode |
| Reset Configuration to Factory Default |
| Exit |
| |
| |
+---------------------------------------------------------+
| <Esc> to continue |
| System BIOS Setup - Custom Configuration |
| (C) 1998 General Software, Inc. All rights reserved |
+-------------------------------+-------------------------------+
|||
| Console on Port 1 >Disabled | Compact Flash Disabled |
| Console Baud Rate 19200 | |
|||
|||
|||
+-------------------------------+-------------------------------+
| ^E/^X/<Tab> to select or +/- to modify |
<Esc> to return to main menu