Rockwell Automation Publication 2711R-UM001H-EN-E - April 2021 23
Chapter 2 Configure the Terminal
Copy a Recipe
Follow these steps to copy a recipe.
1. Go to the File Manager screen.
2. Select the application that you want to copy the recipe, then press Recipe.
3. Press Copy Recipe.
4. Select the location where you want to copy the recipe from, or copy the
recipe to.
5. Select the recipe from the recipe list.
6. Press Copy.
You cannot perform these actions on a password protected application.
IMPORTANT
Copying out a recipe from a design secured application is not allowed.
Recipe
Back
Copy Recipe Edit Recipe
Copy Recipe
Back
Copy
USB
Copy From
To:
Copy
SD
Copy To
From:
PV800_App1
PV800_App1
Recipe1
Recipe2
Recipe3
Recipe6
Recipe7
Recipe5
To Next Page
Loading...
Need help?
General
