6 Rockwell Automation Publication 7000-IN008D-EN-P - August 2019
Preface
If you have multiple drive types or power ranges, confirm that you have the
correct documentation for each specific PowerFlex 7000 product:
• ‘A’ Frame for lower power air-cooled configurations (up to approximately
1250 hp/933 kW)
• ‘B’ Frame for higher-power, air-cooled configurations
• ‘C’ Frame for all liquid-cooled configurations
General Precautions
Commissioning Support
After installation, Rockwell Automation Medium Voltage Support is responsible
for commissioning activities for the PowerFlex 7000 product line.
Phone: 519-740-4790
Option 1 for technical support and option 4 for startup and field modification
inquiries.
MVSupport_technical@ra.rockwell.com or
MVSupport_services@ra.rockwell.com
Rockwell Automation support includes, but is not limited to:
• quoting and managing product on-site start-ups
• quoting and managing field modification projects
• quoting and managing customer in-house and on-site product training
ATTENTION: This drive contains ESD (Electrostatic Discharge) sensitive parts
and assemblies. Static control precautions are required when installing, testing,
servicing or repairing this assembly. Component damage can result if ESD
control procedures are not followed. If you are not familiar with static control
procedures, reference Allen-Bradley publication 8000-4.5.2
, “Guarding Against
Electrostatic Damage” or any other applicable ESD protection handbook.
ATTENTION: An incorrectly applied or installed drive can result in component
damage or a reduction in product life. Wiring or application errors, such as,
undersizing the motor, incorrect or inadequate AC supply, or excessive ambient
temperatures can result in malfunction of the system.
ATTENTION: Only personnel familiar with the PowerFlex 7000 Adjustable
Speed Drive (ASD) and associated machinery should plan or implement the
installation, start-up and subsequent maintenance of the system. Failure to
comply may result in personal injury and/or equipment damage.
To Next Page
Loading...
