10
Technical Data
Addresses: 1– 9999 (long DCC address)
Max. engine current / total load: 1 A
Function outputs (each and in total): 0,8A each
Dimensions: 20,0 x 11,0 x 3,5 mm
The decoder is preset at Address 03 with operating in 28 driving stages and can be driven
and programmed in DCC and Motorola
3)
data format.
Decoder protection:
▪ Temperature protection the decoder deactivates and the lights flash rapidly at 100°C.
▪ Short circuit monitoring of the motor and function connections.
1) RailCom is a registered trademark of the company Lenz GmbH, Giessen
2) Märklin is a registered trademark of the company Gebr. Märklin & Cie. GmbH, Göppingen,
Germany
3) Motorola is a registered trademark of the company Motorola lnc.,Tempe-Phoenix/Arizona
(USA)
Important instructions:
▪ Digital decoders are modern high-quality electronic products and are to be treated with
special care:
▪ Coming into contact with fluids (e.g. oil, water, cleaning agents …) place the decoder
at risk.
▪ Incorrect treatment with metallic objects (e.g. screwdriver, tweezers…) can cause
mechanical/electrical damage to the decoder.
▪ Rough treatment (e.g. pulling wire strands, bending components) can cause mecha-
nical/electrical damage.
▪ Soldering work on the decoder can result in failures occurring.
8040411920 VI_2013.indd 10 19.06.2013 12:42:18
To Next Page
Loading...
