7
Installing the Podcaster
There are two ways that you can install your Podcaster depending
on how much control you wish to have over your recording.
As your Podcaster is USB compliant, by simply connecting your
USB cable to the microphone and your PC or MAC, you will be
able to record through your Podcaster by using the standard audio
interface controls in your operating system.
However, if you would prefer a more professional level of
recording control, please read the following instructions on how
to install and operate the software.
This software will enable everyone from a first timer to a
seasoned professional to quickly fine tune their recording
environment and improve their sound.
Using Podcaster on a MAC OS X
using existing MAC software
1. Plug one end of the
USB cable into the
microphone and the
other end into your
USB port on the MAC.
The LED will flash red
and then go green to
indicate that everything is
functioning correctly with
USB power. The MAC will
recognise the USB audio
device and automatically
install a universal driver.
2. To select the Podcaster as the computer’s new audio input,
open the ‘System Preferences’ from the dock or the main Apple
Menu (figure 3).
Fig. 3
To Next Page
