Need help?Do you have a question about the RODE Microphones NT1 and is the answer not in the manual?
General| Type | Condenser |
|---|---|
| Acoustic Principle | Pressure Gradient |
| Polar Pattern | Cardioid |
| Frequency Response | 20 Hz - 20 kHz |
| Output Impedance | 100 Ohms |
| Maximum SPL | 132dB SPL |
| Output | XLR |
| Power Requirements | 48V Phantom Power |
Graphical representation of the microphone's directional sensitivity at different frequencies.
Chart showing the microphone's output level across a range of audio frequencies.
Details the included shock mount system designed to isolate the microphone from mechanical noise.
Guidance on using the pop filter for vocals to prevent plosives and moisture.
Information on the RØDE RM2 ring mount as an optional accessory for specific mounting scenarios.
Recommendations for vocal recording, including pop shield use and mic positioning relative to the vocalist.
Specific guidance on distance and angle for vocal recording to achieve desired sound characteristics.
To Next Page