RODE Microphones NT5 User Manual

M3
Multi Powered 3/4” Condenser Microphone
• Externallybiasedcondenser
• Goldsputtered1/2”capsule
• Heavy-dutysatin-nickelplatedbody
• Dualpoweroperation
• Surfacemountcircuitry
• Lownoise
Acoustic Principle Pressuregradient DirectionalPattern Cardioid
FrequencyRange 20Hz-20kHz Sensitivity -38dBre1Volt/Pascal(12mV@
94dBSPL)+/-2dB@1kHz
OutputImpedence 100Ω Dimensions Length-118mm(4.6456”)
Diameter-20mm(0.7874”)
Output Connection 3pinXLR,balancedoutput
betweenPin2(+),Pin3(-)
andPin1(ground)
ShippingWeight Single-350g
MatchedPair-1.54kg
NetWeight 101g
• Fullfrequencyresponse
• AvailableasCertiedMatchPair
• DesignedandmanufacturedinAustralia
• Full10yearwarranty*
NT5
Compact1/2”CardioidCondenserMicrophone
Features
Specications
FrequencyResponse PolarPattern
Included Accessories
*Afteronlineregistration
Australia
107Carnarvonst,SilverwaterNSW2128Australia
Ph:+61296485855 Fx:+61296482455
USA
POBox4189SantaBarbaraCA93140USA
Ph:+18055667777 Fx:+18055660071
www.rodemic.com
• Single-RM5standmount,ZP1zippouch
 andWS5windshield
• MatchedPair-2xRM5standmount,RC5case
 and2xWS5windshield

RODE Microphones NT5 Specifications

General

Acoustic Principle	Pressure Gradient
Polar Pattern	Cardioid
Frequency Response	20 Hz - 20 kHz
Output Impedance	100 ohms
Maximum SPL	143 dB SPL
Power Options	Phantom Power (48V)
Output Connection	XLR
Power Requirements	48V Phantom Power
Capsule	0.50"
Type	Condenser
Address Type	Side
Dimensions	20 x 142 mm

Summary

Introduction

Specifications

Frequency Response

Graph showing the microphone's frequency response from 20 Hz to 20 kHz.

Polar Pattern

Diagram illustrating the microphone's directional sensitivity at different angles.

Accessories

Using the NT5

Storage

Warranty