Need help?Do you have a question about the RODE Microphones NT 2 and is the answer not in the manual?
Details on power supply requirements, cable connections, and ensuring correct microphone connectivity with a mixer.
Guidance on setting polar patterns (omni/cardioid) and response switches (flat/low frequency cut, 10db pad).
Advice on achieving desired sound through mic positioning, EQ, and room acoustics.
Instructions for cleaning the microphone body, barrel, and proper storage with moisture-absorbing crystals.
Critical warnings against mechanical shock, capsule tampering, unauthorized modifications, and misuse.
Details on power supply requirements, cable connections, and ensuring correct microphone connectivity with a mixer.
Guidance on setting polar patterns (omni/cardioid) and response switches (flat/low frequency cut, 10db pad).
Advice on achieving desired sound through mic positioning, EQ, and room acoustics.
Instructions for cleaning the microphone body, barrel, and proper storage with moisture-absorbing crystals.
Critical warnings against mechanical shock, capsule tampering, unauthorized modifications, and misuse.
General| Type | Condenser |
|---|---|
| Frequency Range | 20Hz - 20kHz |
| Polar Pattern | Cardioid, Figure-8 or Omni |
| Power Options | +48V phantom power |
| Output Connection | XLR |
| Power Requirements | 48V Phantom power |
| Capsule | 1.00" |
To Next Page