Need help?Do you have a question about the RODE Microphones NT-USB MINI and is the answer not in the manual?
General| Type | Condenser |
|---|---|
| Acoustic Principle | Pressure gradient |
| Active Electronics | Yes |
| Polar Pattern | Cardioid |
| Frequency Range | 20 Hz - 20 kHz |
| Output Connection | USB-C |
| Bit Depth | 24-bit |
| Sample Rate | 48 kHz |
| Direct Monitor | Yes |
| Headphone Output | 3.5mm |
| Headphone Amp | Yes |
| Zero-Latency Monitoring | Yes |
| Built-in Pop Filter | Yes |
Secure the NT-USB Mini using its swivel mount into a magnetic desk stand or thread.
Connect the USB cable to the computer and NT-USB Mini, then select it as audio input/output.
Connect headphones and adjust volume using the knob, or toggle zero-latency monitoring.
Download RØDE Central for processing, settings, and firmware updates.
Device complies with Part 15 of FCC Rules, subject to conditions regarding interference.
Tested to comply with Class B digital device limits for residential interference protection.
Measures for correcting harmful interference to radio or television reception.
Provides ID, Company Name, Model, and Country of Origin for South Korean regulations.
Specifies the power requirements for the device: 5Vdc, 0.5A.
QR code linking to more detailed user guide information.
Caution against listening at high volume levels for extended periods to prevent hearing damage.
Information on product recycling and contact details for RØDE representatives.
To Next Page