Need help?Do you have a question about the RODE Microphones NT1-A and is the answer not in the manual?
Covers acoustic principle, electronics, pattern, frequency, and output details.
Details on the SM1 Shock Mount, thread adaptor, and zip pouch.
Instructions for powering the NT1-A with Phantom Power.
Best practices for recording vocals, guitar/bass, piano, and drums.
Proper storage procedures and product warranty information.
Covers acoustic principle, electronics, pattern, frequency, and output details.
Details on the SM1 Shock Mount, thread adaptor, and zip pouch.
Instructions for powering the NT1-A with Phantom Power.
Best practices for recording vocals, guitar/bass, piano, and drums.
Proper storage procedures and product warranty information.
General| Acoustic Principle | Pressure Gradient |
|---|---|
| Type | Condenser |
| Polar Pattern | Cardioid |
| Frequency Response | 20 Hz - 20 kHz |
| Sensitivity | -31.9dB re 1V/Pa (25mV @ 94dB SPL) +/- 2dB |
| Self Noise | 5 dBA |
| Equivalent Noise Level | 5 dBA |
| Impedance | 100 Ohms |
| Output Impedance | 100 Ohms |
| Power Requirement | 48V Phantom Power |
| Output Connection | XLR |
| Weight | 326 g |
| Dimensions | 190mmH x 50mmW x 50mmD |
| Maximum SPL | 137dB SPL |
| Max SPL | 137dB SPL |
| Connector | XLR |
To Next Page
