Need help?Do you have a question about the RODE Microphones VideoMic and is the answer not in the manual?
Graph showing audio frequency response from 20Hz to 20kHz.
Diagrams illustrating the microphone's directional pickup patterns at different frequencies.
Controls the power and engages a low-frequency cutoff filter for noise reduction.
Visual feedback on battery status (flashes red on startup, green for good charge, red when low).
Three-position switch in the battery compartment for reducing signal sensitivity by 10dB or 20dB.
Graph showing audio frequency response from 20Hz to 20kHz.
Diagrams illustrating the microphone's directional pickup patterns at different frequencies.
Controls the power and engages a low-frequency cutoff filter for noise reduction.
Visual feedback on battery status (flashes red on startup, green for good charge, red when low).
Three-position switch in the battery compartment for reducing signal sensitivity by 10dB or 20dB.
General| Frequency Response | 40Hz - 20kHz |
|---|---|
| Max SPL | 134dB SPL |
| Equivalent Noise Level (A-weighted) | 20dBA |
| Output Impedance | 200Ω |
| Output Connection | 3.5mm |
| Power | 1.5V AA battery or phantom power (11-48V) |
| Battery Life | 100 hours |
| Type | Shotgun Microphone |
To Next Page
