Need help?Do you have a question about the RODE Microphones M2 and is the answer not in the manual?
General| Acoustic Principle | Pressure Gradient |
|---|---|
| Polar Pattern | Cardioid |
| Frequency Response | 40 Hz - 20 kHz |
| Power Requirements | Phantom Power 48V |
| Connector | XLR |
Details acoustic principles, polar pattern, and frequency response.
Lists key audio performance metrics including impedance, sensitivity, noise, and output levels.
Specifies the required power supply and output connector type for operation.
Provides the weight and physical size measurements of the microphone.
Visual representation of the microphone's frequency response curve.
Diagram illustrating the microphone's directional pickup pattern at different frequencies.
Describes the RM1 microphone stand mount included with the product.
Details the protective ZP1 zip pouch for storing the microphone.
Highlights the primary features such as pickup pattern, switch, body, RF rejection, and warranty.
Guidance on power supply, connecting the stand-mount, and using microphone cables.
Recommendations for connecting to mixers/recorders and allowing microphone stabilization.
Advice on setting mixer gain, using Peak Program Indicator, and microphone handling.
Instructions for positioning foldback monitors and avoiding feedback by not cupping the microphone.
Guidance on removing from stand mount, wiping, using the zip pouch, and caring for the crystal pack.
Details the standard warranty, extension options, and exclusions.
Provides contact details for international, USA, and technical support inquiries.
To Next Page
