Need help?Do you have a question about the Rodec MX1800 and is the answer not in the manual?
Product complies with European EMC and Low Voltage Directives.
Conformity with NEN-EN 55103-1 and NEN-EN 55103-2 standards.
Designed to meet UL 60950 and TUV EN 60950 standards.
Crucial safety guidelines for operating the mixing panel.
Recommendations for safe and optimal installation of the mixing panel.
Proper methods for cleaning the mixing panel.
Input select, level, and EQ controls for each channel.
Controls for effects assignment, routing, and audio balance.
Controls for master/monitor outputs and VU meter indicators.
LED indicators and potentiometers for channel effects assignment.
Controls for audio balance, signal routing, and pre-fader listening.
Volume controls for channels and DJ microphone functions.
Crossfader operation and talk-over control for microphone.
Volume controls for master and monitor outputs.
Monitor output EQ and mono/stereo mode selection.
Switch for recording and main mix effects assignment.
Main mix effects routing and VU meter signal selection.
Headphones volume, selection, and output controls.
Potentiometer to adjust the crossfader response curve.
Power switch function and Effects IN/OUT 1 for music signal.
Symmetrical master and monitor outputs for connecting amplifiers.
DJ microphone input and ground terminal.
Effects IN/OUT for the microphone channel.
Balanced microphone input and phono input with RIAA correction.
Asymmetrical master output and second headphones connector.
Effects IN/OUT 2 and alarm/music mute input.
Optional input for priority signals like alarm messages.
Priority signal level control and universal mains power inlet.
Outputs for digital (S/P DIF) and analogue recording.
Optional USB I/O and digital line inputs.
Analogue line inputs for various audio sources.
Diagrams for RCA, JACK, USB, and XLR connectors.
Description of RCA and XLR cable types and uses.
Cables for connecting microphones and audio gear.
Cables for professional audio equipment connections.
Y-split cables for effects machines and audio filters.
Steps for connecting equipment and powering on the mixing panel.
Connecting headphones and adjusting volume safely.
Choosing audio sources and using PFL for monitoring.
Routing signals through effects and adjusting channel faders.
Operating master faders and the crossfader for mixing.
Adding microphone signals and using the talk-over function.
Recording mixed signals and routing main mix to effects.
Selecting VU meter signals and using priority input.
Muting music remotely using a switch-contact.
Controlling music volume remotely via potentiometer or voltage source.
Switching music on/off using a 0V or 5V output.
Playing alarm messages via the priority input.
Description of the subsonic filter protecting bass loudspeakers.
Instructions for installing the USB input/output kit.
Instructions for installing the remote mute and priority set.
Instructions for upgrading to digital optical channel faders.
Instructions for upgrading to a digital optical crossfader.
Information on ordering standard and fader knob sets.
Specifications for analogue input and output signal levels.
Specifications for digital interfaces and signal headroom.
Specifications for crosstalk, frequency response, and subsonic filter.
Specifications for dynamic range and total harmonic distortion.
Details on music, microphone, monitor equalizers, and power.
Operating temperature, humidity, and physical dimensions.
Definitions for Amplitude and Analogue signal.
Definitions for Asymmetrical, Balance, Binary, Bit.
Definitions for CD, Crossfader, DAB, DAT.
Definitions for dB, Digital signal, and DJ.
Definitions for DVD, Equalizer, Fader, Flash card.
Definitions for FX, Frequency, HD, Headphones.
Definitions for Hz, I/O, Insert, JACK.
Definitions for kHz, LED, Loudspeaker.
Definitions for Line, MD, Micro, Mono.
Definitions for MP3, Mute, Pan, PCM.
Definitions for PFL, Phono, Potentiometer, Quantized.
Definitions for RCA and Rec (recording).
Definitions for RIAA, Sample, Sound.
Definitions for S/P DIF, Stereo, Subsonic.
Definitions for SUM, Symmetrical, Talk-over.
Definitions for THD and USB.
Definitions for Volume, VU, Wave, Wet signal.
Definition for the XLR connector.
General| Crossfader | Yes |
|---|---|
| EQ | 3-band per channel |
| Type | Analog DJ Mixer |
| Inputs | 4 stereo (RCA), 2 microphone (XLR) |
| Outputs | Booth (RCA) |
To Next Page