Rog Pony - Advanced Maintenance Tasks

Note: In case of any doubt or if you have quesons concerning the maintenance of your bike, turn to your authorised Rog repair service or other expert repair service.
5
Maintaining the closing mechanism
To enable simple assembly and disassembly of your bike, it is
important to maintain a clean and well-lubricated closing mecha-
nism. If the folding mechanism becomes rigid and less flexible, it
must be opened, cleaned, and a silicone lubricant must be injected in
the slots of the folding mechanism. Aer injecng the lubricant,
bend the folding mechanism mulple mes to allow the lubricant to
apply to the closing mechanism well. If the folding mechanism sll
remains less flexible, visit an authorised Rog repair service or other
expert repair service provider that will properly disassemble the
folding mechanism, thoroughly clean it, and lubricate it.
6
Keep in a dry place
Avoid leaving your bicycle in the rain. Keep it in a dry place. Also, do
not expose your bicycle to corrosive substances. Keep your bicycle in
a dry place and do not expose it to rain and corrosive substances.
8
Damage to the colour coating
If the colour coang on the bike frame is damaged, use a correcve
lacquer to properly coat it, protecng it from any further rusng of
the damaged areas.
The roune cleaning and lubricaon of the chain will prolong its
service life. In order to properly maintain the chain, first degrease it
using a degreaser, then dry it, and finally apply chain lubricant.
9
Chain maintenance
7
Reflectors and lights
Regularly check the reflectors, lights, and their carriers, and make
sure to keep them clean, undamaged, and safely installed.
Rounely clean and lubricate all movable parts of the bike. All bike
components should be properly screwed and set up.
10
Maintenance of all movable parts
ROG Bikes Manual for the Use of the Pony Folding Bike Page 12