Rog Pony - Table of Torque Values; Service and Warranty; After-Sale Service and Maintenance

AFTER-SALE SERVICE AND WARRANTY
In order for the warranty to be valid, your bike must undergo roune
aer-sale services. These aer-sale maintenance and repair services
must be carried out once a year, which means that, in order for the
warranty to be valid, the first such service must be carried out within
one year aer purchasing or receiving your bike. To then achieve the
validity of the full warranty period, the bike must also undergo
roune aer-sale services in each consequent year. The aer-sale
repair and maintenance service may be performed by an authorised
Rog repair service or other expert repair service provider. The proper
care for the bike and the performed aer-sale services shall be
proved by subming invoices issued for such services.
It is recommendable that all Pony bikes undergo annual aer-sale services
performed by an authorised Rog repair service or other expert repair service
provider. By performing roune maintenance, you will be able to prolong the
service life of your bike and ensure its safe use.
Authorised Rog repair service or other expert repair service providers are
qualified to perform suitable repairs and to set up all of the components of
your bike. If any part of your bike does not funcon properly or if you are
experiencing trouble using it, turn to your closest authorised Rog repair
service provider as soon as possible. The list of the authorised Rog sellers and
repair service providers is available at www.rogbikes.com/rogspots.
Aer-sale services are provided aer the warranty period expires as well.
Repairs, bike maintenance, and spare parts are provided for payment up to
three (3) years following the expiraon of the warranty period.
AFTER-SALE SERVICE
18
Nm
Component Newton Meter (Nm)
Handlebar stem screw
18
Nm
16
Nm
159
in/lbs
159
142
184
kg f/cm
184
71
in/lbs
71
354
in/lbs
82
kg f/cm
408
kg f/cm
82
163
Stem fastener
25
Nm
Component Newton Meter (Nm)
Fastening the front axle
28
Nm
221
in/lbs
248
255
kg f/cm
286
Fastening the rear axle
Seat guide screw
5
Nm
Component Newton Meter (Nm)
Seat post screw
18
Nm
4
Nm
44
in/lbs
159
35
51
kg f/cm
184
41
Kickstand screw
Folding mechanism lever
Handlebar, stem bearings,
seat, and seat post
8
Nm
Component Newton Meter (Nm)
Brake lever
8
Nm
V-brakes
Brakes and brake levers
Frame and fork
40
Nm
Component Newton Meter (Nm)
Pedal and crank
354 40840
Nm
Bottom bracket
Cranks, axle and the pedal area
Table
of torque values
Service
and warranty
Front and rear hub
ROG Bikes Manual for the Use of the Pony Folding Bike Page 16