Roger PRT12MF-DES - 6 Technical Specification

PRT12MF-DES PRT82MF PRT84MF Operating Manual.doc
2018-08-23
21/23
Fig. 10 Firmware Update window view.
6. TECHNICAL SPECIFICATION
Table 5. Technical specification
Supply voltage
Nominal 12VDC, min./max. range 10-15VDC
Current consumption (average)
PRT12MF-DES: ~70 mA
PRT12MF-DES-BK: ~50 mA
PRT82MF: ~60 mA
PRT82MF-BK: ~45 mA
PRT84MF: ~65 mA
PRT84MF-BK: ~50 mA
Inputs
Two (IN1..IN2) NO/NC inputs, approx. 3.5 triggering level
Tamper protection
Isolated 50mA/24V contacts, shorted when enclosure is closed
Proximity cards
13.56MHz according to ISO14443A and MIFARE
Reading range
Up to 7 cm (for ISO MIFARE® Ultralight, Classic)
Up to 5 cm (for ISO MIFARE® DESFire EV1, Plus)
Note: Reading distance is defined for good quality proximity
cards placed in optimal position against the reader. For all
readers the optimal position for card reading is in the front of
the device (card surface parallel to the front).
Distances
150m maximal cable length for RACS CLK/DTA bus between
controller and reader
IP code
PRT12MF-DES: IP65
PRT82MF/PRT84MF: IP41