Instrument Setup
R&S
®
FPC
42User Manual 1178.4130.02 ─ 07
2. Select the "Instrument Setup" menu item to open the instrument setup dialog box.
3. Select the "Set Time" menu item in the "Date and Time" category.
4. Enter the time you want with the numeric keys.
If you enter an invalid time, the R&S FPC highlights the invalid part and does not
accept the input until you enter a valid time.
Selecting a time zone
The displayed time represents the system time (UTC by default). If you need to create
a different time stamp without changing the system time, you can define an offset that
is added or subtracted to the system time.
1. Press the "Setup" key to open the setup menu.
2. Select the "Instrument Setup" menu item to open the instrument setup dialog box.
3. Select the "Time Zone" menu item in the "Date and Time" category.
4. Enter the time offset you want with the numeric keys.
Note: We recommended that you select the time zone before you define the sys-
tem time.
9.4 Regional Settings
Remote commands required to configure regional settings:
●
Chapter 19.5, "System Configuration", on page 209
Selecting the user interface language
The R&S FPC supports several user interface languages. When you change the lan-
guage, all user interface elements that contain text are translated into the correspond-
ing language.
Note that the "Language" menu item remains English, regardless of the language you
select.
1. Press the "Setup" key to open the setup menu.
2. Select the "Instrument Setup" menu item to open the instrument setup dialog box.
3. Select the "Language" menu item in the "Regional" category.
4. Select the language of your choice.
Selecting the date format
The date format defines the way that the date is displayed.
1. Press the "Setup" key to open the setup menu.
2. Select the "Instrument Setup" menu item to open the instrument setup dialog box.
Regional Settings
To Next Page
Loading...
Need help?
General
