R&S FSH Putting into Operation
Connecting the R&S FSH to a PC
Quick Start Guide 1309.6269.12 - 09 48
Configuring the R&S FSH4View software
► Start R&S FSH4View.
► Select the "LAN" tab in the "Instrument Connect" dialog box.
► Press the "Add" button to create a new network connection.
► Specify a name for the new network connection, for example R&S FSH.
► Enter the IP address for the R&S FSH (in this case 192.0.2.10)
► Confirm the entry with the "OK" button.
The connection is now created and configured and is added to the IP Configuration
list.
► Select the new connection labeled R&S FSH.
► Press the Connect button to establish the connection.
To Next Page
Loading...
