Operating the Instrument
R&S
®
FSW
109Getting Started 1338.4102.02 ─ 08
measurement settings are restored. Each channel is displayed in a separate tab
on the screen.
An additional tab ("MultiView") provides an overview of all currently active chan-
nels at once.
Only one measurement can be performed at any time, namely the one in the cur-
rently active channel. However, in order to perform the configured measurements
consecutively, a Sequencer function is provided.
To start a new channel
1. Select the [Mode] key.
2. In the "Mode" dialog box, select the required application on the "New Chan-
nel" tab.
A new tab is displayed for the new channel.
To change the application in an active channel
1. Select the tab of the channel you want to change.
2. Select the [Mode] key.
Displaying Results
To Next Page
Loading...
