Trying Out the Instrument
R&S
®
FSW
64Getting Started 1338.4102.02 ─ 08
You see the spectrogram compared to the standard spectrum display. Since
the calibration signal does not change over time, the color of the frequency
levels does not change over time, i.e. vertically. The legend at the top of the
spectrogram window describes the power levels the colors represent.
Figure 6-4: Spectrogram of the calibration signal
6.3 Activating Additional Measurement Channels
The R&S FSW features multiple measurement channels, i.e. you can define sev-
eral measurement configurations in parallel and then switch between the chan-
nels automatically to perform the measurements sequentially. We will demon-
strate this feature by activating additional measurement channels for a different
frequency range, a zero span measurement, and an I/Q analysis.
To activate additional measurement channels
1. Press the [Mode] key on the front panel.
Activating Additional Measurement Channels
To Next Page
Loading...
