Rohde & Schwarz FSW Series - Page 2

This manual applies to the following R&S
®
FSW models with firmware version
4.70 and later:
●
R&S
®
FSW8 (1331.5003K08 / 1312.8000K08)
●
R&S
®
FSW13 (1331.5003K13 / 1312.8000K13)
●
R&S
®
FSW26 (1331.5003K26 / 1312.8000K26)
●
R&S
®
FSW43 (1331.5003K43 / 1312.8000K43)
●
R&S
®
FSW50 (1331.5003K50 / 1312.8000K50)
●
R&S
®
FSW67 (1331.5003K67 / 1312.8000K67)
●
R&S
®
FSW85 (1331.5003K85 / 1312.8000K85)
In addition to the base unit, the following options are described:
●
R&S
®
FSW-B4, OCXO (1313.0703.02)
●
R&S
®
FSW-B10, external generator control (1313.1622.02)
●
R&S
®
FSW-B13, high-pass filter (1313.0761.02)
●
R&S
®
FSW-B17, digital baseband interface (1313.0784.02)
●
R&S
®
FSW-B21, external mixer (1313.1100.26)
●
R&S
®
FSW-B24, preamplifier (1313.0832.XX)
●
R&S
®
FSW-B25, electronic attenuator (1313.0990.02)
●
R&S
®
FSW-B71, analog baseband interface (1313.1651.XX, 1313.6547.02)
●
R&S
®
FSW bandwidth extension options: R&S FSW-B160 (1313.1668.02) /
(1325.4850.04) / (1325.5357.04) / R&S
®
FSW-B320 (1313.7172.02) / /
R&S
®
FSW-B512 (1313.4296.04) / R&S
®
FSW-B1200 (1331.6400.xx) /
R&S
®
FSW-B2000 (1325.4750.xx) / R&S
®
FSW-B2001 (1331.6916.xx) /
R&S
®
FSW-B4001 (1338.5215.xx) / R&S
®
FSW-B5000 (1331.6997.xx) /
R&S
®
FSW-B6001 (1338.5221.xx) / R&S
®
FSW-B8001 (1338.5238.xx)
© 2020 Rohde & Schwarz GmbH & Co. KG
Mühldorfstr. 15, 81671 München, Germany
Phone: +49 89 41 29 - 0
Email: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – data without tolerance limits is not binding.
R&S
®
is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1338.4102.02 | Version 08 | R&S
®
FSW
Throughout this manual, products from Rohde & Schwarz are indicated without the
®
symbol, e.g.
R&S
®
FSW is indicated as R&S FSW.