Instrument Tour
R&S
®
FSW
40Getting Started 1338.4102.02 ─ 08
Function key Assigned functions
[LINES] Configures display lines and limit lines.
[INPUT/OUTPUT] Displays softkeys for input/output functions.
Measurement start functions
[RUN SINGLE] Starts a single new measurement (Single Sweep Mode).
[RUN CONT] Starts a continuous measurement (Continuous Sweep Mode).
Function execution (in navigation controls area)
[UNDO] Reverts last operation
[REDO] Repeats previously reverted operation.
5.1.4 Navigation Controls
The navigation controls include a rotary knob, navigation keys, and Undo / Redo
keys. They allow you to navigate within the display or within dialog boxes.
Navigating in tables
The easiest way to navigate within tables (both in result tables and configu-
ration tables) is to scroll through the entries with your finger on the touch-
screen.
5.1.4.1 Rotary Knob
The rotary knob has several functions:
●
For numeric entries: increments (clockwise direction) or decrements (counter-
clockwise direction) the instrument parameter at a defined step width
●
In lists: toggles between entries
●
For markers, limit lines, and other graphical elements on the screen: moves
their position
●
For active scroll bars: moves the scroll bar vertically
●
For dialog boxes: Same effect as the Enter key when pressed
Front Panel View
To Next Page
Loading...
