Trying Out the Instrument
R&S
®
FSW
71Getting Started 1338.4102.02 ─ 08
3. Press the "Split/Maximize" key on the front panel to maximize the spectrum
window, as we currently do not need the spectrogram display.
4. Press the "RUN SINGLE" key on the front panel to perform a single sweep so
we have a fixed trace to set a marker on.
5. Press the [MKR] key on the front panel to display the "Marker" menu.
Marker 1 is activated and automatically set to the maximum of trace 1. The
marker position and value is indicated in the diagram area as M1[1].
6. Now you can move the marker by tapping and dragging it to a different posi-
tion. The current position is indicated by a dotted blue line. Notice how the
position and value change in the marker area of the diagram.
Setting and Moving a Marker
To Next Page
Loading...
