Preparing for Use
R&S
®
FSW
25Getting Started 1338.4102.02 ─ 08
5. Select the instrument for display:
● "Display 1" : internal monitor only
● "Display 2" : external monitor only
● "Duplicate" : both internal and external monitor
6. Tap "Apply" to try out the settings before they are accepted permanently, then
you can easily return to the previous settings, if necessary.
7. Select "OK" if the settings are suitable.
4.10 Windows Operating System
The instrument contains the Windows 10 operating system which has been con-
figured according to the instrument's features and needs. Changes in the system
setup are only required when peripherals like a keyboard or a printer are installed
or if the network configuration does not comply with the default settings. After the
R&S FSW is started, the operating system boots and the instrument firmware is
started automatically.
Windows Operating System
To Next Page
Loading...
