General Instrument Setup
R&S
®
FSW
578User Manual 1173.9411.02 ─ 19
Remote command:
DIAGnostic:SERVice:HWINfo? on page 1039
9.3.4.2 Information on Versions and Options
Information on the firmware version and options installed on your instrument is provi-
ded in the "Versions Options" tab of the "System Configuration" dialog box. The unique
R&S device ID is also indicated here, as it is required for license and option administra-
tion.
You can also install new firmware options in this dialog box.
Installing options in secure user mode
Be sure to install any new options before Secure User Mode is enabled; see chap-
ter 3.1.7, "Protecting Data Using the Secure User Mode", on page 37.
For restricted users in secure user mode, this function is not available!
Expired option licenses
If an option is about to expire, a message box is displayed to inform you. You can then
use the "Install Option" function to enter a new license key.
If an option has already expired, a message box appears for you to confirm. In this
case, all instrument functions are unavailable (including remote control) until the
R&S FSW is rebooted. You must then use the "Install Option" function to enter the new
license key.
General Instrument Settings
To Next Page
Loading...
