Rohde & Schwarz Hameg HMP4040 - Front Panel Controls and Interface; Front Panel Overview and Key Controls; Channel, Function, and Output Buttons; Input;Output Sockets and Connections

26
Subject to change without notice
Operating controls
2 Controls and display
Front panel HMP4040
(for HMP4030 channel 4 is not applicable)
1
POWER (pushbutton)
Power switch turns the instrument on/off
2
Display (LCD)
Display of parameters
3
Arrow buttons (illuminated)
Cursor keys for shifting the cursor to the position to be
changed
4
Rotary knob
Knob to adjust and activate the values
5
Numerical keyboard (buttons)
Setting of all operating parameters
6
CH1 (illuminated button)
Activates channel 1
7
CH2 (illuminated button)
Activates channel 2
8
Enter (button)
Button to confi rm the values via keyboard
9
CURRENT (illuminated button)
Adusting current settings
10
VOLTAGE (illuminated button)
Adusting output voltage
11
CH3 (illuminated button)
Activates channel 3
12
MENU (illuminated button)
Display of menu options
13
FUSE (illuminated button)
Elektronic fuse, selectable for each channel
14
TRACK (illuminated button)
Activates the Tracking Function
15
CH4 (illuminated button)
Activates channel 4
16
REMOTE (illuminated button)
Toggling between front panel and external operation
17
RECALL (illuminated button)
Restore of instrument settings
18
OUTPUT (illuminated button)
Turn on/off selected channels
19
STORE (illuminated button)
Storing of instrument settings
20
Ground (4 mm socket)
Ground connector (directly connected to the mains safety
ground)
21
SENSE (4 mm safety sockets; 2 per channel)
Compensation of lead resistances
22
CH1 (4 mm safety sockets)
Output channel 1; 0...32V / 10A
23
CH2 (4 mm safety sockets)
Output channel 2; 0...5,5V / 10A
24
CH3 (4 mm safety sockets)
Output channel 3; 0...32V / 10A
(HMP2020 without channel 3)
25
CH4 (4 mm safety sockets)
Output channel 4; 0...32V / 10A
(HMP4030 without channel 4)
Fig. 2.1: Front panel HMP4040
2 4 6 7 8
9
10
1
20
21
3 5
11
12
13 15
16
17
18
19
22
23
22
24
22
14
25
22