Need help?Do you have a question about the Rohde & Schwarz Hameg HMP4030 and is the answer not in the manual?
General| Output Channels | 3 |
|---|---|
| Output Voltage Range | 0 - 32 V |
| Display | LCD |
| Protection | Overvoltage, Overcurrent, Overtemperature |
| Ripple and Noise | < 1 mVrms |
| Load Regulation | <0.01% + 3mV |
| Line Regulation | <0.01% + 3mV |
| Temperature Coefficient | < 100 ppm/°C |
| Interface | USB |
| Output Current Range | 0-3A |
Detailed output specifications for HMP4030/HMP4040, including terminals and power.
Output parameters for 32V channels, including resolution, accuracy, and ripple.
Critical safety guidelines, including grounding, handling live parts, and hazardous environments.
Environmental requirements and conditions for safe and optimal instrument operation.
Detailed descriptions of all front panel buttons, knobs, and display elements for operation.
Details on the power supply's technology, channel configuration, power management, and resolution.
Instructions for initial setup and safe operation of the instrument.
Step-by-step guide to setting and adjusting the output voltage for selected channels.
How to set the maximum current limits for each channel to protect loads.
Explanation of the tracking function for synchronizing multiple channels.
How to link electronic fuses between channels for protection.
How to generate and edit arbitrary voltage/current waveforms using the editor.
How to adjust and manage overvoltage protection settings for channels.
To Next Page
