Programmable 3/4 Channel
High-Performance Power Supply
HMP4030/HMP4040
HMP4040
� HMP4030: 3 x 0…32V/0…10A, 384W max.
� HMP4040: 4x 0…32V/0…10A, 384W max.
� 384W output power realized by intelligent power management
� Low residual ripple: ‹150μV
rms
due to linear post regulators
� High setting- and read-back resolution of 1mV/0.2mA
� Keypad for direct parameter entry
� Galvanically isolated, earth-free and short circuit protected
output channels
� Advanced parallel- and serial operation via V/I tracking
� EasyArb function for free definable V/I characteristics
� FuseLink: individual channel combination of electronic fuses
� Free adjustable overvoltage protection (OVP) for all outputs
� All parameters clearly displayed via LCD/glowing buttons
� Rear connectors for all channels including sense
� USB/RS-232 Interface, optional Ethernet/USB or IEEE-488
Rear outputs for simple
integration in rack systems
3 channel derivative
HMP4030
Individual linking of single
channels using FuseLink
NEW
To Next Page
Loading...
