21
Subject to change without notice
Table of content
Deutsch 2
English
Declaration of Conformity 20
General remarks regarding the CE marking 20
Programable Power Supply HMP4030 / HMP4040 22
Specifi cations 23
Important hints 22
1.1 Symbols 24
1.2 Unpacking 24
1.3 Positioning 24
1.4 Transport and Storage 24
1.5 Safety instructions 24
1.6 Proper operating conditions 24
1.7 Cooling 25
1.8 Warranty and Repair 25
1.9 Maintenance 25
1.10 Change of mains voltage and fuse replacement 25
2 Controls and display 26
3 Short description HMP4030 / HMP4040 27
4 Operation of the HMP4030 / HMP4040 28
4.1 First time operation 28
4.2 Selection of channels 28
4.3 Adjustment of output voltage 28
4.4 Adjustment of the current limits 29
4.5 Activation of channels 29
5 Extended functions 30
5.1 Storing/recalling settings (STORE/RECALL) 30
5.2 Tracking function 30
5.3 Menu options (MENU) 30
6 Remote Control 32
6.1 SCPI commands 32
6.2 Common Commands 32
6.3 Program Commands 32
6.4 Supported SCPI commands and data formats 33
6.5 Examples of programming 33
7 Extended operating modes 34
7.1 Compensation of the voltage drop across the
cables (using the sense input) 34
7.2 Parallel and series connection of power
supplies 34
8 Appendix 35
Glossary 35
List of Figures 35
To Next Page
Loading...
