Need help?Do you have a question about the Rohde & Schwarz Hameg Instruments active PROBE HZO30 and is the answer not in the manual?
General| Attenuation | 10:1 |
|---|---|
| Input Voltage | ±8 V |
| Input Resistance | 1 MΩ |
| Length | 1.3 m |
| Connector | BNC |
Details the probe's attenuation ratio and system bandwidth.
Specifies maximum input voltage and dynamic measuring range limits.
Presents a graph showing how input impedance varies with signal frequency.
Lists input resistance, capacitance, oscilloscope coupling, and overshoot values.
Details the probe's physical weight and cable length.
Specifies operating altitude, temperature range, and humidity.
Describes the HZO30's inline probing system, T-shaped housing, and high impedance advantages.
Lists all items included in the scope of delivery for the HZO30 probe.
Guidelines to avoid personal injury, fire, or damage to the product.
Explains symbols like danger, electric shock, and earth ground terminals.
Ensures correct setup for measuring instrument input coupling and power supply.
Advises on protecting the probe cable from damage and avoiding mechanical shock.
Details cleaning the probe exterior with distilled water or isopropyl alcohol.
Covers quality control, warranty standards, and procedures for repairs and RMAs.
Illustrates various accessories like probe tips, ground leads, adapters, and marker bands.
To Next Page