Command-line tools
29Administration manual 4603.7988.02 ─ 03
Name Parameter Description
Enable/Disable use of a
dedicated FAT driver
--replacefatdriver-enabled Uses a FAT driver that is part of R&S Trus-
ted Disk instead of the FAT driver contained in
the UEFI firmware by default
Note: The dedicated FAT driver does not use an
internal cache and does not update the last
access timestamps of the FAT file system. This
method helps to reduce the amount of (partial)
write operations that could corrupt the file sys-
tem.
Reset configuration --reset-configuration Resets all settings to its default values
Disabling logging or reducing its verbosity prevents the analysis or reproduction of
problems or errors by our support team.
5.2.4 Structure
InstallSBM.exe
--print-configuration
--logging-enabled <true|false> (default: true)
--logging-level <fatal|error|warn|info|debug|trace> (default: info)
--bcdbackup-enabled <true|false> (default: true)
--replacefatdriver-enabled <true|false> (default: true)
--reset-configuration (reset 'logging-enabled', 'logging-level' and
'bcdback-enabled' to defaults)
Boot manager tool (UEFI/GPT)
To Next Page
Loading...