Rohde & Schwarz SR8050 - Exciter > Status > Digital Status Menu Window

Chapter 5 Operation
5300.9677.71 - 5.45 - EN-4
2.7.1.4 Exciter > Status > Digital Status Menu Window
Status of digital signal at AES/EBU input
The following displays indicate the status of the digital signal, i.e. the audio content. There
are separate displays for the left and right channels.
Display Explanation
Nominal Status display for the set nominal input amplitude
Current Display of the peak value for the input amplitude during the last second;
expressed in percentage and dBu terms
Status Display of the current status; the possibilities are as follows:
– OFF
The input is not active.
– OK
Input is active and input amplitude is OK
– Clipped
Input is active and input amplitude is too high; A/D converter is over-
driven
– Too Low
Input is active but input amplitude is below monitoring threshold