Chapter 5 Operation
5300.9677.71 - 5.67 - EN-4
2.9 Parameter Set Menu Window
The transmitter provides 8 memory locations for parameter sets. A parameter set contains
all the settings which the exciter and output stage require in order to function in an "operat-
ing environment".
Since each parameter set can be loaded as the current setting, processed and then saved
again, it is possible to change quite quickly between different operating environments (e.g.
frequency A vs. frequency B). Moreover, parameter sets are also used for operating an N+1
transmitter system.
Display/setting item Description
Forward Power Present forward power of the transmitter
Nominal Power Nominal power of the transmitter (cannot be modified)
Actual Ref. Voltage Present value of the reference Voltage
RF Warning Limit Warning threshold for the forward power referenced to nominal power. A
warning is given if the value drops below the threshold.
RF Fail Limit Fault threshold for the forward power referenced to nominal power. A
fault message is displayed if the value drops below the threshold.
To Next Page
Loading...
