Rohde & Schwarz SR8050 - Exciter > Static Delay Menu Window

Chapter 5 Operation
5300.9677.71 - 5.59 - EN-4
2.7.6 Exciter > Static Delay Menu Window
You can use the Static Delay menu window to enter static delay settings for the internal
MPX signal and to synchronize the pilot tone (when using the internal stereo coder). These
settings are only allowed and will only have any effect when the SR8000-K27 "FM SYNC"
option is installed.
Display Description
Ext. Ref. State Status indication of the external oscillator reference
Options:
– Off (the internal TCXO is used)
– OK (the reference signal is present)
– Not OK (the reference signal is not present or is defective)
Ext. Ref. Locked Displays the lock in status of the oscillator reference
Options:
– Off (the internal TCXO is used)
– Locked (the reference signal is locked in and being used)
– Not Locked (the reference signal is not locked in and is not being
used)
Setting item Description
Pilot Sync Source
Selected Setting the source for synchronizing the internal stereo coder pilot tone
Possible selections:
– Off (idling)
– AES User Bits (user bits in the AES signal)
a)
– AES Start Frame (start of block in the AES signal)
b)
– AES SF/User Bits (automatic choice between user bits and start of
block)
c)
– External PPS (one pulse per second from an external source;
optional)
d)