Rohde & Schwarz SR8100 - User Manual

5300.9677.72 -4 - 0.1 -
Broadcasting Division
System Manual
R&S
®
SR8000 – FM Transmitter
VHF, Solid-State Low-Power
All activities connected with installing, starting up, operating, maintaining,
troubleshooting, and servicing the described system must be carried out by specialist
technicians only.
Printed in Germany

Rohde & Schwarz SR8100 Specifications

General

Brand	Rohde & Schwarz
Model	SR8100
Category	Transmitter
Language	English

Summary

CHAPTER 1 SAFETY

Safety Instructions for Transmitter Systems and Equipment

Details critical safety regulations for operating transmitter systems and equipment.

General Safety Instructions

Contains general safety guidelines applicable to all Rohde & Schwarz products.

Special Hazard Information

Highlights specific hazards related to AC supply voltage, high energy circuits, and RF radiation.

CHAPTER 2 DESIGN AND FUNCTION

Protection of Electrical System

Explains how the transmitter's electrical system is protected against faults, power failures, and overvoltages.

CHAPTER 3 INSTALLATION

Cabling

CHAPTER 4 PUTTING INTO OPERATION

Putting a Transmitter into Operation

Guides the user through the process of bringing the transmitter online, including parameter setup and checks.

Setting Modulation-Specific Parameters

Covers configuration of modulation modes, audio inputs, pilot tones, preemphasis, and deviation settings.

Entering Output Stage Settings

CHAPTER 5 OPERATION

Local Operation

CHAPTER 6 MAINTENANCE

Software Update