Chapter 5 Operation
5300.9677.71 - 5.33 - EN-4
2.5.5 Setup > SNMP Menu
You can use the menu window in the SNMP menu to configure the SNMP connection.
2.5.5.1 Setup > SNMP > General Menu Window
You can use the General menu window to set the UDP port for SET/GET and to activate
message suppression for Local mode.
Function Description
Baud rate For setting the baud rate as required (from 4800 to 115200)
When using Bitbus: 19200
Data bits Number of data bits of the serial interface (5 to 8)
Stop bits Number of stop bits of the serial interface (1 / 1.5 / 2)
Parity For setting the parity (none/odd /even)
To Next Page
Loading...
