Chapter 6 Maintenance
5300.9677.72 - 6.6 - EN-4
6. Confirm the choice of SR8000 by clicking on Next.
The R&S Software Distributor searches the network for compatible transmitters. The
program window displays the message "Searching for devices...". The transmitters
found are then listed.
Note If the search fails, try disabling all firewalls between the PC and transmitters.
7. Select the desired transmitter from the list by enabling its check box.
8. Click Install to start the update.
The R&S Software Distributor copies the update to the transmitter. The update is then
unpacked on the transmitter.
The progress of these procedures can be followed in the State column. Finally the mes-
sage "Ready: see report for details!" is displayed if the update succeeded.
To Next Page
Loading...
