Rohr HP-160L User Manual

ROHR
Qualitat Durch
Forschung
Pe
erty
INVERTER TIG / MMA
ONDULEURTIG
/ MMA
HP-160L
©
HP-200PP
¢
HP-250PP
A
This manual
provides important
safety
information andinstructions
on howto set
up your
welder.
Every
welding
situation has the
potential
for
personal
injury.
In
order to minimizethat
risk,
it’s
important
to read
this manual
carefully.
Keep
this
manual
in
a safe
place,
review it
frequently
and ensure that
all users have read it to
ensure safe
operation.
Ce manuel fournit
des
informations de sécurité
importantes
et des
instructions concernant
la
configuration
de votre
chargeur
de batterie.
Afin de
minimiser les
risques,
i!
est
important
de
lire
attentivement ce manuel.
Conservez ce manuel dans un
endroit
sir,
relisez-le
fréquemment
et assurez-vous
que
tous les
utilisateurs le
lisent,
afin assu
rer uneutilisation
sécurisée.

Rohr HP-160L Specifications

General

Model	HP-160L
Category	Welding System
Output Current	160A
Welding Process	TIG, MMA
Duty Cycle	60%
Protection Class	IP21

Summary

Quick Start Guide - Setup

Essential Connections and Grounding

Connect gas supply, ground, electrode holder, TIG gun, and HF plug, ensuring secure fittings.

Air Intake Clearance

Ensure the machine's air intake is unobstructed for proper ventilation and cooling.

Control Panel Layouts

HP-160L Panel Details

Identifies Power Switch, LCD Display, Mode Switch, and Output Dial for the HP-160L model.

HP-200PP/HP-250PP Panel Details

Details controls for HP-200PP/HP-250PP: Power, Pulse, MMA/TIG, Gas Delay, Amperes.

Welding Procedures

TIG Welding Steps

Outlines TIG welding process, safety, gas, connections, and arc initiation.

MMA Welding Steps

Details MMA welding process, electrode connection, power supply, and settings.

Safety and Precautions

Operational Safety Guidelines

Covers risks from loose clothing, electrical hazards, grounding, and proper machine operation.

Personal Protection and Environment

Advises on protective gear, insulation, secure position, gas handling, and fire safety.

Technical Specifications

Environmental Operating Conditions

Specifies operating environment: dry, max 90% humidity, -10 to +40°C temperature.

Electrical and Performance Data

Lists Power Input, Phase, Frequency, Current, Voltage, Duty Cycle, and Protection ratings.

Troubleshooting Common Issues

Welding Quality Problems

Addresses oxidisation, arc striking, and electrode maintenance for weld quality.

Power and Output Failures

Covers lack of power, no welding output, faulty cables, and connection issues.

CE Declaration and Compliance

EU Directive Compliance

Declares machine compliance with EU directives and standards for safety and EMC.

Manufacturer and Documentation

Identifies manufacturer, notified body, and location of technical documentation.