What to do if my Rohr Welding System has no power?
If your Rohr Welding System isn't powering on, make sure the power cable is in good condition and properly connected. If the cable is faulty, a qualified professional should replace it.
Why is my Rohr Welding System making HF arc-striking sounds but not welding?
If your Rohr Welding System is making the HF arc-striking sound but not welding, check the torch and ground cables to ensure they're correctly connected and undamaged. Replace any faulty cables with the help of a qualified professional. Also, ensure the grounding cable is making good contact with the welding object, and inspect the tungsten electrode to see if it needs grinding down to a taper or if it's contaminated.
How to fix too much weld when MMA welding with my Rohr Welding System?
If you're getting too much weld when MMA welding with your Rohr Welding System, ensure that the current you're using isn't too high for the thickness of the welding rod.
General| Input Voltage | 230V |
|---|---|
| Input Frequency | 50/60Hz |
| Output Current Range | 20-140A |
| Duty Cycle | 60% at 140A |
| Electrode Size | 1.6 - 3.2mm |
| Protection Class | IP21S |
| Welding Processes | MMA |
| Power Supply | Single Phase |
To Next Page
