Need help?Do you have a question about the ROHS FI8918 and is the answer not in the manual?
General| Category | IP Camera |
|---|---|
| Night Vision | Yes |
| Wireless Security | WEP, WPA, WPA2 |
| Compliance | RoHS |
| Image Sensor | 1/4" CMOS |
| Resolution | 640x480 |
| Minimum Illumination | 0 Lux |
| Connectivity | Wireless |
| Wireless Standard | IEEE 802.11b/g |
| Ethernet | 10/100Mbps |
| Protocols | TCP/IP, HTTP, DHCP, DDNS, SMTP, NTP, UPnP, FTP |
| Video Compression | MJPEG |
| Frame Rate | Up to 30fps |
| Power Supply | DC 5V |
| Operating Humidity | 20% to 80% |
Lists the key capabilities and technical attributes of the IP camera.
Guides on initial software installation and hardware connection steps.
Explains the use of the utility for discovering and configuring IP cameras on the network.
Provides instructions on accessing the camera's web interface for monitoring and control.
Covers comprehensive settings and management options for administrative users.
Configuration of static IP address, subnet mask, and gateway for network connectivity.
Manages motion detection sensitivity, alarm triggers, and upload/email actions.
Provides instructions for updating the camera's system and web UI firmware.
Addresses common issues and provides solutions for IP camera setup and operation.
To Next Page