WWW.FOSCAM.COM FI8918/FI8918W User Manual
Figure 3.11
3.5 Basic Network Settings
If you want to set a static IP for the camera, you need set Basic Network Settings. Keep the
camera in the same subnet of your router or computer.
Figure 3.12
It is the same result if set these settings in IP Camera Tool. (Figure 2.5)
If you don’t know subnet mask, gateway and DNS server. You can check your computer’s local
area connection. It contains all the information.
The step is Control PanelÆNetwork ConnectionsÆDbclick Local Area Connections Æ
Choose SupportÆDetails. You will see all the information in it. (Figure 3.14)
Shenzhen Foscam Intelligent Technology Co., Limited
Tel: 86 755 2674 5668 Fax: 86 755 2674 5168
26
To Next Page
Loading...