Attention
1. Do not drag and drop the winding of cyclone mechanism forcibly to avoid damaging the metal mesh;
2. Dry naturally after washing to avoid corrosion；
3. When replacing the filter, use the original filter by the merchant so as not to damage the vacuum cleaner；
4. When cleaning the filter, use the cleaning brush provided by the original factory. Do not use other steel brush or hard brush；
5. Do not lose the roller fix block, do not use the rolling brush without the roller fix block.
Attention
1. Turn off the power and unplug the adapter when replacing the rolling brush；
2. The cleaning brush has a sharp blade, which is used to cut off anything uncleanable entanglement around the roller. Children should not be exposed to the cleaning
brush；
3. When pushing the rolling brush to release the rolling fixed block, be careful the fixed block pops up quickly and may get lost；
4. Do not allow children to swallow the rolling brush fixed block.；
5. Not lose the rolling brush fixed block, do not use electric brush without the brush holder.
2. Dust cup and metal mesh cleaning: wash the dust cup and metal
mesh with clean water and use it after drying to prevent the dust
from clumping when used again.
1. Cyclone mechanism cleaning: Take out the cyclone mechanism in
the dust cup, clean the dust and hair attached to the metal net.
Roller Replacement
Place the reverse side of the electric brush upward, and push the quick release
button of the electric brush upward to release the electric brush shield.
Remove the rolling brush, roll the card into the mounting position of the roller,
cover with the rolling brush fixed block, and remove the rolling brush to clean
the surface attachment.
Rolling brush cleaning: use a cleaning brush to lift and cut off the
attached hair and fibrous substances on the rolling brush，thereafter
it is separated from the rolling brush.
Dust Cup Cleaning
11
3. Filter cleanliness: take out the filter, clean suspended dust with a brush
and wash it. If necessary, replace the specified filter. It is recommended
to replace the specified filter every 3 months to ensure cleanness.
Rolling Brush Fixed Block
Roller Release Button
To Next Page
Loading...
Need help?
General
