Product disassembly and cleaning
The following cleaning steps should be carried out when the appliance is switched off
Roller brush assembly, disassembly and cleaning
Step 1: Remove the roller brush
Turn the appliance over, press the roller brush cover release buttons simultaneously.
Remove the roller brush cover, take out the roller brush and clean;
Step 2: Roller brush cleaning
Use a cleaning brush to clean and cut out the hair and fibers entangled on the roller brush.
It is recommended to change the roller brush every 3-6 months.
Side brush removal and cleaning
Step 1: Remove the side brush
Turn the appliance over, use a screwdriver to unscrew the screws and take out the side
brush;
Step 2: Side brush cleaning
Use a cleaning brush to pick up and cut the hair and fiber attached to the side brush to
separate it from the side brush. It is recommended to replace the side brush every 3-6
months.Replace the side brush once done cleaning to ensure the cleaning effect.
11
Swipe release button
EN
To Next Page
Loading...
