22
• Enable function
Enable or disable the User function. With the
Keys and select ON to enable and OFF
to disable. Once the desired option is highlighted
press to confirm and exit.
On the main screen you will see the
icon in
automatic function, the
icon in Manual function
and when in Pilot Wire control function.
At the top of the screen, the icon will appear
when in Automatic function and a
when in
Manual function.
If the
icon appears, the radiator will be set on
Pilot Wire function.
• Changing the PIN code
You can change the access PIN
code for this feature.
Use the , , and
buttons. To introduce the current
PIN code.
To confirm select OK. The
screen will show PIN CHANGED.
To Next Page
Loading...
