24
Allows you to enable or disable
the Pilot wire control mode. With
the keys and , select ON
to activate or OFF to disable.
Once the desired option is
selected press the to confirm
and exit.
In the main screen the symbol
will appear.
The pilot wire mode allows your heating only to be controlled
via a pilot wire programmer.
1.7. Open windows function
This function is activated when the temperature sensor detects a
drop of 4ºC from the set temperature within 30 minutes.
On activation of this function, the following image
will appear on the radiator display for 5 seconds:
To Next Page
Loading...
