1.7. Menu/Programming function
In automatic mode, pressing for 3 seconds allows you to program
the radiator directly:
1.
Select the COMFORT temperature setting (20ºC to 30ºC), using
and . The symbol and the temperature will flash.
2.
Press and we can select the ECO temperature (15ºC to 19.5ºC)
using and . The symbol and the temperature will flash.
3. After pressing the button once again, the days of the week will
start flashing and show as DAY1, DAY2, DAY3... We can go forwards
and backwards using the button and . Press to select
the day or days that we wish to program.
4.
Pressing , takes us to the hours we wish to program. To change
the hours use the or buttons. The hours selected will show
as 0h, 1h, 2h,… By pressing the button, we can select the mode
required hour by hour: COMFORT, ECO or OFF.
5.
To finish the programming, press or leave it for 30 seconds
without pressing any buttons.
1.8. “Open Window” function
This function is activated when the probe detects a reduction of 4º in
respect of the set temperature during 30 minutes. On activation the
following image will appear on the radiator display for 5 seconds:
When the “Open window” function is activated, the following screen
To Next Page
Loading...
