Roland CM-500 - 1. Part Names; Front Panel

1.Part Names
@ Front Panel
Ф VOLUME (Volume Control Knob)
p di This adjusts the overall volume which is the output from the Output Jacks or Headphone
Jack. Rotating the knob clockwise will increase the volume, and rotating it counter-
clockwise will decrease it.
* The volume balance of the individual Part can be controlled with the MIDI Volume
(Control Change) messages.
@ AUDIO (Audio Signal Indicator Light)
Regardless of where the volume knob is set, this lights to indicate that a signal (above
the threshold level) is being output.
Roland CM-S500
GS/LA SOUND MODULE
POWER SWITCH
Turns the power on and off.
ж This unit is equipped with a circuit protection device. А brief interval after power up
is required before the unit will operate.
7-4 POWER (Power Indicator Light)
Indicates that the power is on.