Roland Dimension D SDD-320 - Dimension D Product Introduction; Product Description; Key Features; Before Starting and Precautions

DIMENSION
D
The SDD-320
Dimension D is a
special-
ly designed
chorus
effect unit for
add-
ing
spatial effects
to stereo and
monaural
sound sources.
Monaural in-
puts are
converted from a
single point
sound
source into
a
sound
which fills
the entire
stereo field.
The Dimension
D
gives
a
new dimension without
the
apparent
movement of sound
produced
by
most other
chorus devices.
FEATURES
• Both
balanced and
unbalanced in-
puts and outpuSs for
ease of
use
in the
studio or on the
stage,
•
Click-free noisless
switching
between
four
different
dimension modes.
• Remote
controlled
dimension
EF-
FECT/NORMAL
function.
• Fast acting
LED level
indicators,
• Low noise
(S/N
greater
than
95dB,
"A" weighted)
.
• Standard
19"
rack mounL
CONNECTION
BEFORE
STARTING
•
Make sure that
the
line
voltage in
your area meets
the requirements given
in the specifications.
• Check
with your
local Roland dealer
if
you want to
use theS0D-3?Q in
a
foreign
country,
•
Plug the
SDD-320
in before
turning
on the power switch.
PRECAUTIONS
• Do not
open this
unit,
• Unplug
this unit when
i! is not to
be
used for long periods
of lime. Unplug
by grasping the
plug rather than
pulling
on the
cord,
•
Be
careful not to
place
heavy
objects
on
The power cord,
• Avoid using
this
unit in
very high
or
low
temperature
locations.
Also
keep
away from
heaters
and
coolers
since
this
type
of
equipment will
affect
circuit
stability,
• Avoid using
this unit
in very
dusty or
humid places.
»
If
it
is necessary
to
use
this
unit in
an
area
with neon
or
fluorescent
lights,
keep it
as
far
away from
these lights
as
possible since
they will
induce high
levels of noise.
Sometimes changing
the
angle
of this unit
in relation
to the
lights will help
reduce
noise,
•
When connecting this unit, plug the
cord into the external amplifier first,
then plug the other end of the cord into
theSDD-320 output. To disconnect, re-
move the cord from the
SDD-320
first,
then from the amplifier,
•
To clean
this unit, wipe with a
cloth
dampened
with
a
neutral cleanser.
Do
not use
solvents such
as
paint
thinner.
MONO
INPUT
PEDAL SWITCH
DP-2