Roland DP603 - Copying a Saved Song (Copy Song); Deleting a Saved Song (Delete Song)

14
Advanced Operation
Copying a Saved Song (Copy Song)
Songs that have been saved in internal memory can be copied to
USB ash drive. Alternatively, songs stored on a USB ash drive can
be copied to internal memory.
* Audio les cannot be copied.
* If a USB ash drive is not connected, you won’t be able to perform
this operation.
1. Press the [Ambience] button and [Brilliance] button
simultaneously.
2. Use the [K] [J] buttons to select “Copy Song,” and then
press the [s] (Enter) button.
The Copy Song screen appears.
3. Use the [–] [+] buttons to select the copy-source and copy-
destination memory locations (internal memory or USB
ash drive).
4. Press the [J] button.
5. Use the [–] [+] buttons to select the song that you want to
copy.
If you decide to cancel, press the [u] (Exit) button.
6. Press the [s] (Enter) button.
The copy is executed.
NOTE
Never turn o the power or disconnect the USB ash drive while
the screen indicates “Executing...”
7. Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.
Deleting a Saved Song (Delete Song)
Here’s how to delete a song that you saved on an internal memory or
USB ash drive.
MEMO
If you want to delete all songs that have been saved to internal
memory, initialize the memory.
* If you want to delete a song on the USB ash drive, connect your
USB ash drive to the USB Memory port before you continue.
1. Press the [Ambience] button and [Brilliance] button
simultaneously.
2. Use the [K] [J] buttons to select “Delete Song,” and then
press the [s] (Enter) button.
The Delete Song screen appears.
3. Use the [–] [+] buttons to select the memory location
(internal memory or USB ash drive) that contains the song
you want to delete.
4. Press the [J] button.
5. Use the [–] [+] buttons to select the song that you want to
delete.
6. Press the [s] (Enter) button.
A conrmation message appears.
If you decide to cancel, press the [u] (Exit) button.
7. Use the [J] button to select “Yes,” and then press the [s]
(Enter) button.
The deletion is executed.
NOTE
Never turn o the power or disconnect the USB ash drive while
the screen indicates “Executing...”
8. Simultaneously press the [Ambience] button and
[Brilliance] button to exit Function mode.